B2B technical product support for surface preparation, finishing, painting and waterproofing
Product Finder0Enquiry List
SunChem Lunaris Floor Protection Tape product photograph
Surface Protection Tapes

Floor Protection Tape

Temporary floor protection

Floor Protection Tape is a temporary protective film for hardwood, tile and laminate floors during painting, renovation and fit-out work. The adhesive is formulated to hold position under foot traffic and equipment movement, then release without transferring residue to the finished surface. Adhesion and release behaviour vary by floor finish, age and cleanliness, so test a small area and confirm the intended removal window before covering a full floor.

Suitable context
500 sq. ft. roll200 sq. ft. roll

Common applications

  • Painting projects
  • Renovation and fit-out work
  • Short-term surface protection
Product overview

Where this product fits

Floor Protection Tape is a temporary protective film for hardwood, tile and laminate floors during painting, renovation and fit-out work. The adhesive is formulated to hold position under foot traffic and equipment movement, then release without transferring residue to the finished surface.

Key benefits

  • Shields floors from paint drips and physical damage.
  • Adheres tightly to multiple flooring types without slipping.
  • Removes easily, leaving no sticky mess behind.
  • Withstands heavy foot traffic and project wear.
  • Suited to home upgrades, relocations, or refinishing.

Selection and use checkpoints

  • Confirm surface cure and cleanliness
  • Test adhesive compatibility
  • Avoid excessive dwell time

Pro tip

Overlap tape edges slightly for full coverage on wide surfaces like hallways.

Technical information

Product specifications

Suitable surfaceCompatible tile, stone, wood or laminate after testing
Primary purposeTemporary floor protection
Available formats500 sq. ft. roll, 200 sq. ft. roll
Country of originIndia

Compatibility

Hardwood, tile, laminate

Purpose

Floor protection

Application route

Surface test, application and removal sequence

  1. Identify and clean the surface

    Remove dust and loose contamination without using a cleaner that could affect adhesion.

  2. Test adhesion in an inconspicuous area

    Confirm that the tape or film can be applied and removed without surface damage or residue.

  3. Apply without unnecessary stretch

    Use firm, even pressure and protect edges that may receive paint, dust or foot traffic.

  4. Inspect and remove as directed

    Check the protection during the project and remove it within the approved use window.

Further reading

Related technical guides

How to Protect Floors During PaintingRead →
Practical guidance

Floor Protection Tape FAQs

Can this tape be used on carpets?

No, Lunaris Floor Protection Tape is designed for hard surfaces like hardwood, tile, and laminate. For carpets, consider a dedicated carpet protection film.

Will the adhesive damage my flooring?

No, it peels off cleanly without leaving sticky residue. However, avoid leaving it on for extended periods (over 30 days) to prevent adhesion buildup.

Can I use this outdoors?

This tape is primarily designed for indoor use. While it can handle temporary outdoor applications, prolonged exposure to sunlight and moisture may reduce effectiveness.

Is it safe for newly installed floors?

We recommend waiting at least 72 hours before applying the tape to freshly installed or refinished floors to allow the floor to cure.

How do I remove the tape without damage?

Gently peel at a 45-degree angle. If any adhesive remains, wipe with a damp cloth or use Lunaris Floor Shampoo for a spotless finish.